FPV-Community.com

I finished my quadrocopter build!
after 3maiden flights, one crash and some adjustements, my quadrocopter is ready for flying
I will order a go pro tomorow morning, and maybe a transmitter and reciever a little later

a lots of parts ^^



the KK xquad controller

I started with the frame

and the wiring...







the power wiring and the frame is finished

I decided to use a plastic box (like many others )

but as you can (maybe) see, the box is not high enough, so after some adjustments and two flights, I have preferred to use larger arms and a bigger box also






I had a crash on the 4 flight of the quad :/
heven if one arm is broken and one motor is bend, it still flies well!
this is the onboard recording of the crash:(the video is not chronological)
sorry for the bad vibrations

That's a nice build log, Isotop

Thanks for all the detailed pictures, this helps me to realize my first quadrocopter build project ever. Check it out: How to build a WiiCopter (german, but english version will follow)

Best regards
Heiko

thanks,
It sounds very interesting
but I don't understand german so I am glad for the English version

another crash today
the first two loops went well, but the third was a little bit too low...

I am proud to present you my first HD onboard video,
it's not FPV, just LOS flying, but I will order a Tx and Rx very soon...



I have just made a few flights this weekend from a driving car, (also LOS)
I will post the video tomorrow, I'm still editing it

as I promised, here is the other video:



for all the fast forward scenes, I was in a car, driving behind the quad,
(a friend was driving, when I was piloting)
the max speed of the quad during this video is 45 Km/h,
and I have the impression that he can go a little faster
no dogs were harmed or maltreated during the filming of this video
please say me what do you think, your suggestions or comments