FPV-Community.com

Hello everyone!

I'll log here the build of my Quadcopter.

I will use the cheap HobbyKing frame until I build a reliable stabilization system. After that I'll build my own frame with aluminum arms.
The parts are:
3000 mAh Nanotech Turnigy LiPo
Turnigy PLUSH 18A ESCs
750 kv motors
12x4.7 and 10x6 Propellers (I'll test both)

Special thanks to Juz, Isotop and Schumixmd for the help and advices.

I already have the components to build the flight controller board but I'll just start it after having the Quad built and the props balanced.
I will also try to build my own controller or adapt a commercial standard transmitter.
The frame is already mounted and now I'm testing each motor and ESC individually.

Frame image:


First video: Testing motors:

Awesome. Are they RCTimer motors? The controller looks great... really looking forward to flight videos when you finish the build...Keep us updated Mauricio, this is one kool project

Wish i could make my own circuitboards :-)
seems to work perfect !!