I have new Panasonic GP-CX161 board cameras for sale at my site:
http://cctvohio.com
Color cameras are $24.00 ea., and Black & White are $12.00 ea..
$5.50 Priority Mail Shipping per order in the US.
I've also just finished the software that will adjust the 161's image settings via I2C using a computer. See my website for more info on the Free GPCX161 I2C Tool program.
Thanks, JetGun
Very nice prise!
Maybe you can put some video's on your website to show the quality of that cam.
looking good
can i order 1
Does it work with a EzOSD and fatshark googles ?
What lens do i need?
(09-01-2010 10:21 PM)Roel-CP Wrote: [ -> ]looking good
can i order 1
Does it work with a EzOSD and fatshark googles ?
What lens do i need?
It comes with a 1.9mm lens. The thread size is strange on these cameras, so its hard to replace the lens, I havent found anything that fits mine yet.
But yes it will work with OSD and fatshark goggles. The voltage requirement is 5V for this camera, so you might need a regulator, or maybe the EZOSD has 5V output for camera power?
(09-01-2010 10:21 PM)Roel-CP Wrote: [ -> ]looking good
can i order 1
Does it work with a EzOSD and fatshark googles ?
What lens do i need?
The 1.9mm lens is the best for FPV. Aaron knows more about the EzOSD etc. than I do, and I think he covered that. You can order at my site:
http://cctvohio.com
The link to the thread I posted a couple msgs up, has a lot of info about the lenses also. I think around page 22 I put info on how to attach other lenses.
Hi JetGun,
because you are advertising here for free, you have to send me one of your cameras as thank
This would be nice.
Thanks and best regards
Heiko
Hahah
Heiko don't pull his leg out
I think he just started his shop.
Otherwise he has to send 2 one for you and one for me.
I have to find out if the EZ currentsensor also makes 5V
Regelators always getting hot.
The ezosd also made 5V
Just have to rearange some wire's
I orderd 1
Please send it to me as soon as possible
And put not more then $20 on the package to avoid costums.
(09-02-2010 08:16 AM)Roel-CP Wrote: [ -> ]Hahah
Heiko don't pull his leg out
I think he just started his shop.
Otherwise he has to send 2 one for you and one for me.
I have to find out if the EZ currentsensor also makes 5V
Regelators always getting hot.
The ezosd also made 5V
Just have to rearange some wire's
I orderd 1
Please send it to me as soon as possible
And put not more then $20 on the package to avoid costums.
I think it'll do you well. The current draw on this camera is very low, so it shouldnt over load anything.
JetGun, you may aswell tell them about the I2C computer link you've developed FOR FREE so users can build the circuit and reprogram thier cameras to suit their needs.
This is an amazing feature on a cheap camera like this - you have to dish out some serious cash for other cams that are as user configurable as this one.
I havent had the need to tweak any of the settings in the camera, but the fact that it's available is very very cool.
I hope he will setup the cam properly
I dont need to tweak the cam.
Just need nice view on my fatshark