Introductory overview. Linked documentation is a starting point; this page is not an equipment test or a model-specific setup procedure.
Disconnect and inspect
Stop, switch off, and disconnect the battery using the manufacturer’s sequence. Let hot components cool. Keep hands away from moving parts and do not inspect a powered drivetrain.
Look for loose or missing wheel hardware, damaged tires, cracked suspension pieces, frayed wires, and trapped debris. Make a repair list while the session is fresh in your mind.
Clean for your exact model
Follow the manual’s cleaning and wet-use instructions. Waterproof claims apply to specified components and conditions; they do not make every bearing, connector, battery, or accessory maintenance-free.
Avoid directing high-pressure water at the vehicle. Remove loose dirt with suitable tools and use only cleaning and lubrication methods allowed by the manufacturer. Document water exposure for follow-up maintenance.
Check movement without power
Inspect steering and suspension travel according to the manual. A new tight spot, unexpected play, or damaged linkage is a reason to investigate before driving again. Do not force a mechanism that feels obstructed.
Check the drivetrain for debris and visible damage. Model-specific gear mesh, slipper, and differential settings require their own documented procedure; do not copy a setting from an unrelated truck.
Put the battery away properly
Inspect the pack, leads, and connector. Stop using damaged, swollen, leaking, or otherwise abnormal batteries and follow manufacturer and local disposal guidance. Do not try to repair a damaged pack.
Use the exact battery and charger manuals for storage, charging, and supervision requirements. A shared connector is not proof of compatible chemistry, cell count, charging mode, or current.
MAKE IT USEFUL
Try this check.
Make a three-item record: what changed during the run, what needs repair, and what must be checked before the next drive.
References and next steps.
These official resources support the next step. Hardware, firmware, and local requirements can differ.
Documentation-based guidance. Confirm details in your exact model’s manual. Report a correction.